Description
The UF103P-HT is the Ultramax Systems replacement element for the Ultrafilter 80 new Sheet range. As a Grade P general purpose particulate element it holds bulk solid debris, pipe scale and rust, rated at 3 µm. In service it sits at the front of the train, protecting the finer stages behind it. Catching the coarse load here keeps the coalescing stages from blinding early. The element is built to the original dimensions and needs no modification to the housing. It is the element used in AG 0060VPE-HT housings. It is held in Australian stock and priced to work against the cost of going direct to the OEM.
This replacement filter element from Ultramax is a high-quality, Ultrafilter 80 Series - High Temperature-compatible alternative. Designed as an alternative to OEM part numbers VPE10/3-HT | V-PE10/3-HT | EU10/3P-HT | PE 10/3-HT | ODO 103 PE/P Al-HT. It is engineered to suit housing models AG 0060VPE-HT | AG 0060 VPE-HT | AG0060VPE-HT. Manufactured to strict quality standards, it delivers reliable system protection at a competitive price.
Cross Reference Table
| Ultrafilter 80 Series - High Temperature | VPE10/3-HTV-PE10/3-HTEU10/3P-HTPE 10/3-HTODO 103 PE/P Al-HT |
|---|
- AG 0060VPE-HT
- AG 0060 VPE-HT
- AG0060VPE-HT
Other Grades for This System
| Grade | Part number | Filtration | Micron |
|---|---|---|---|
| P | UF103P-HTYou are here | General Purpose Coalescer | 3 µm |
| A | UF103A | Activated Carbon | 0.01 µm |
| A | UF103A-HT | Activated Carbon | 0.01 µm |
| HC | UF103HC | Hopcalite | — |
| P | UF103P | General Purpose Coalescer | 5 µm |
| X | UF103X | General Purpose Coalescer | 1 µm |
| X | UF103X-HT | General Purpose Coalescer | 1 µm |
| XO | UF103XO | General Purpose Coalescer | 0.1 µm |
| XO | UF103XO-HT | General Purpose Coalescer | 0.1 µm |
| Y | UF103Y | Oil Removal Coalescer | 0.01 µm |
| Y | UF103Y-HT | Oil Removal Coalescer | 0.01 µm |
Features
- Grade P media rated at 3 µm
- Holds bulk solid debris, pipe scale and rust
- Dimensional match to the Ultrafilter 80 new Sheet original, fits the existing housing without modification
- Suits AG 0060VPE-HT and 2 further housing models
- Held in Australian stock, not brought in to order
Applications
- First stage protection on a new installation
- Air lines carrying pipe scale or rust
- General workshop air
- Compressor outlet protection
All brand names, trademarks and part numbers shown on this page remain the property of their respective owners and appear for identification purposes only. Ultramax Systems is not affiliated with, endorsed by, or a licensee of any manufacturer listed. Cross references indicate dimensional and performance equivalence, not original equipment supply. Please confirm the fitment against your housing before you order.
WarrantyEvery element is warranted to meet the Ultramax standard specification when it reaches you. If one does not, we will replace it, supply an equivalent, repair it, or cover the cost of replacing it. Tell us within 14 days of purchase to arrange a return. A restocking fee applies, and special order items cannot be returned. Our terms and conditions set out the detail.
