Description
Ultramax Systems supplies the UF315Y-HT as a direct replacement within the Ultrafilter 80 new Sheet range. As a Grade Y high efficiency oil removal coalescing element it strips the fine oil aerosol and water carryover a general purpose stage leaves behind, rated at 0.01 µm. It sits directly downstream of a Grade X stage. It carries the fine load a general purpose element is not built to hold. It matches the original on dimensional fit and drops into the existing housing without modification. It is the element used in AG 0007MVAK-HT housings. It is held in Australian stock and priced to work against the cost of going direct to the OEM.
This replacement filter element from Ultramax is a high-quality, Ultrafilter 80 Series - High Temperature-compatible alternative. Designed as an alternative to OEM part numbers AK3/1.5-HT | EU3/1.5-HT | EU3/1.5D-HT | EU3/1.5H-HT | MVAK3/1.5-HT. It is engineered to suit housing models AG 0007MVAK-HT | AG 0007 MVAK-HT | AG0007MVAK-HT. Manufactured to strict quality standards, it delivers reliable system protection at a competitive price.
Cross Reference Table
| Ultrafilter 80 Series - High Temperature | AK3/1.5-HTEU3/1.5-HTEU3/1.5D-HTEU3/1.5H-HTMVAK3/1.5-HT |
|---|
- AG 0007MVAK-HT
- AG 0007 MVAK-HT
- AG0007MVAK-HT
Other Grades for This System
| Grade | Part number | Filtration | Micron |
|---|---|---|---|
| Y | UF315Y-HTYou are here | Oil Removal Coalescer | 0.01 µm |
| A | UF315A | Activated Carbon | 0.01 µm |
| A | UF315A-HT | Activated Carbon | 0.01 µm |
| P | UF315P | General Purpose Coalescer | 5 µm |
| P | UF315P-HT | General Purpose Coalescer | 3 µm |
| X | UF315X | General Purpose Coalescer | 1 µm |
| X | UF315X-HT | General Purpose Coalescer | 1 µm |
| XO | UF315XO | General Purpose Coalescer | 0.1 µm |
| XO | UF315XO-HT | General Purpose Coalescer | 0.1 µm |
| Y | UF315Y | Oil Removal Coalescer | 0.01 µm |
Features
- Grade Y media rated at 0.01 µm
- Strips the fine oil aerosol and water carryover a general purpose stage leaves behind
- Dimensional match to the Ultrafilter 80 new Sheet original, fits the existing housing without modification
- Suits AG 0007MVAK-HT and 2 further housing models
- Held in Australian stock, not brought in to order
Applications
- Paint and powder coating lines
- Instrument air and control circuits
- Laboratory and analytical air
- Pre-filtration ahead of an activated carbon stage
All brand names, trademarks and part numbers shown on this page remain the property of their respective owners and appear for identification purposes only. Ultramax Systems is not affiliated with, endorsed by, or a licensee of any manufacturer listed. Cross references indicate dimensional and performance equivalence, not original equipment supply. Please confirm the fitment against your housing before you order.
WarrantyEvery element is warranted to meet the Ultramax standard specification when it reaches you. If one does not, we will replace it, supply an equivalent, repair it, or cover the cost of replacing it. Tell us within 14 days of purchase to arrange a return. A restocking fee applies, and special order items cannot be returned. Our terms and conditions set out the detail.
